Just when PS3 gamers thought the Xbox 360 was the only console to have “red light issues,” the blinking red light error began on Sony’s new gaming rig. While it is not a very common error, it is still very frustrating and can be difficult to deal with. In this article, you’ll learn 3 foolproof PS3 blinking red light fix steps you can follow to help you get your console fixed and back to gaming as quickly as possible.
The causes of the flashing red light error on your PS3 are not that important, in all honesty. So instead of wasting time discussing what has caused the problem, here are the steps you should take to try and fix the PS3 blinking red light error:
1. Turn off your PS3 console and leave it turned off for at least 30 minutes before restarting it. Occasionally the problem is due to overheating, so this will give your console temporary relief from the error that occurs.
2. Borrow a PS3 hard drive from a friend or family member who also has a console, and then install it on your PS3 before you reset it. If you don’t have access to another hard drive, you can try removing and reinstalling your own hard drive. However, be careful not to accidentally damage this delicate piece of hardware.
3. Check that all cables and leads connected to your PS3 are inserted correctly; remove them one by one and then put them back. Also, turn off the modem/router you use to connect your PS3 to the network, and then restart it as well.
By following the steps above, you should have a good chance of being able to fix the PS3 blinking red light issue. You don’t need to pay Sony $150 to fix your console; You can do it yourself in less than an hour.